Quantum Data 802BT User Manual Download Page 156

Page: 156 / 744

146

Chapter 9

Testing HDMI Sink Devices

Overview

The HDMI option enables the generator to test HDMI-compliant sink devices. With the

HDMI option, the generator outputs HDMI-compatible TMDS video and data packets

containing audio and auxiliary information.

The HDMI option includes the following features:

•

Advanced E-EDID parsing

•

Generation of all EIA/CEA-861-B formats below 165 MHz (with all possible variations)

•

Pixel repetition test capabilities

•

Internal sine wave generator and external SPDIF audio input for audio testing

•

AFD test capabilities

•

Automatic and manual InfoFrame configuration

Note: This chapter refers to the EIA/CEA-861B standard, which may be purchased from

http://global.ihs.com/

For HDMI compliance testing procedures, see “

Testing EDID in HDMI sink device for

HDMI compliance

” on page 173.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands