Quantum Data 802BT User Manual Download Page 166

Page: 166 / 744

156

Chapter 9

Testing HDMI Sink Devices

4. Using the

Image

knob, select the appropriate image (see table above).

The image appears on the connected HDMI display. The image shows the current

settings for the HDMI audio output. For example, the AudioLR image is shown below.

5. Press and release the

Step

key.

The

Step

key illuminates.

6. Using the

Image

knob, adjust the amplitude, frequency, or sampling rate (based on the

selected image) of the HDMI audio output.

7. To verify proper HDMI audio handling, check the following on the HDMI display:

•

Audio is output from the proper channels (left, right, or both).

•

When amplitude is adjusted, the volume is subsequently changed.

•

When frequency is adjusted, the pitch is subsequently changed.

8. When finished, press and release the

Step

key.

The light on the

Step

key extinguishes.

9. To test another HDMI audio output type, return to step 4.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands