Quantum Data 802BT User Manual Download Page 65

Page: 65 / 744

802BT/802R Video Test Generator User Guide

Format library

The generator has a built-in library of formats. The same format library is used for all 802

models. The formats are stored in read-only memory (ROM) along with the generator’s

operating code.

Compatibility

Some formats are for displays and graphics systems that may not be compatible with a

specific generator model. Attempting to load an incompatible format will give you an error

message. If a format has too high of a pixel rate, a modified version of the format can be

created with reduced horizontal timing parameters that bring the pixel clock rate below the

limit of the generator. The horizontal and vertical rates however are correct. This lets you

light-up a display and verify most of its operation. These modified formats can be created

through the

FMTJ

command which references a global parameter (

JRAT

) that determines

the bandwidth of the generator.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands