Quantum Data 802BT User Manual Download

Page: 122 / 744

112

Chapter 8

Analyzing Digital Sources and Cables

Starting the Analyzer Setup Utility

Use the Analyzer Setup Utility to view or modify the configuration of the analyzer.

To start the Analyzer Setup Utility:

1. Start the generator in Digital-Friendly mode (see page 18).

2. Connect a digital display with the DVI or HDMI transmitter on the generator.

3. Select a format supported by the display (see “

Selecting formats automatically

” on

page 25).

4. Select the Analzyer image.

The Analyzer Setup Utility appears on the connected display.

Note: The Report Setup feature is not implemented.

Enabling and disabling analyzer images

Certain analyzer tasks require images to be displayed on an HDMI/DVI display.

To enable or disable display of analyzer images:

1. Start the Analyzer Setup Utility (see page 112).

2. Press and release the

Step

key.

The

Step

key illuminates and the

Analyzer Images

field is highlighted.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands