Quantum Data 802BT, User Manual, Page: 163 / 744

802BT/802R Video Test Generator User Guide 153
To test an HDMI display using HDMI pixel repetition:
1. Connect an HDMI display to the Tx connector on the generator.
2. If necessary, set up the generator for HDMI output.
• See “ Setting up the generator for HDMI operation ” on page 147 for steps on setting
up the generator for HDMI operation.
3. Using the Format knob, select the HDMI gaming format you want to test.
Note: Gaming formats on the generator have the characters "4x" in their names (such
as “480i4x29” or “576i4x25”). For a listing of all HDMI formats, see the table on page
149.
4. Using the Image knob, select the PixelRep image.
The PixelRep image appears on the connected HDMI display (as shown below).
5. Press and release the Step key.
The Step key illuminates.
3 853 pixels/line
4 640 pixels/line
5 512 pixels/line
6 427 pixels/line
7 366 pixels/line
8 320 pixels/line
9 284 pixels/line
10 256 pixels/line
Pixel repetition factor
(image version)
Horizontal resolution