Quantum Data 802BT User Manual Download Page 173

Page: 173 / 744

802BT/802R Video Test Generator User Guide

163

To test an HDMI display’s ability to support AFD:

1. Connect an HDMI display to the Tx connector on the generator.

2. If necessary, set up the generator for HDMI output. See “

Setting up the generator for

HDMI operation

” on page 147.

3. Using the

Format

knob, select an appropriate video signal format. See the table on

page 149 for a listing of HDMI formats.

4. Using the

Image

knob, select the AFDtest image.

The AFDtest image appears on the connected HDMI display (as shown below).

5. Press the

Step

key.

The

Step

key illuminates, and the following image appears.

6. Using the

Image

knob, select an AFD scenario by selecting the appropriate image

version number (1-12).

Note: The image version number corresponds with the AFD case (or code). See the

table on page 162 for a listing of the image numbers that correspond with each AFD

case.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands