Quantum Data 802BT User Manual Download Page 650

Page: 650 / 744

640

Appendix B

Image Reference

Purpose

An out-of-focus monitor displays fuzzy graphic images and poorly formed, hard-to-read

text characters.

Method

On monitors with a single (static) focus adjustment, adjust the control for the best average

focus over the entire screen. The focus at certain locations of the screen should be within

specified limits.

Some monitors have a static and one or more dynamic focus controls. The sequence for

adjusting them and the areas of the screen that they affect depend on the monitor under

test.

Format

Description

A listing of the data contained in any format. The primary image lists the settings of the

format driving the display. The secondary image can be used to list the contents of any

stored format (via the Location field).

This pattern works best at display resolutions of at least 640 pixel by 480 lines.

FormatRx

Description

Used by analzyer to view timing parameters measured from external signal. For more

information, see “

Measuring timing of video signal

” on page 114.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands