Quantum Data 802BT User Manual Download Page 164

Page: 164 / 744

154

Chapter 9

Testing HDMI Sink Devices

6. Using the

Image

knob, select the appropriate image version number (1-10).

Note: The image version number correlates with the pixel repetition factor.

The pixel repetition factor appears in the center of the image.

7. To verify proper handling of the selected HDMI gaming format, check the following in

the image on the HDMI display:

•

The horizontal active area is resized to the appropriate number of clocked pixels

using vertical bars to the left and right of the default (2880 pixel) image.

•

The white vertical borders and circles in the active area appear thicker.

•

The white text in the center of the active area appears stretched and bigger.

8. Using the

Image

knob, select additional pixel repetition factors (as desired) to verify

proper handling of the selected HDMI gaming format using variable horizontal

resolutions.

9. When finished, press and release the

Step

key.

The light on the

Step

key extinguishes.

10. To test another HDMI gaming format, return to step 3.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands