manualshive.com logo in svg

Quantum Data 802BT, User Manual, Page: 171 / 744

Share
Download
Quantum Data 802BT User Manual Download Page 171

 

802BT/802R Video Test Generator User Guide

161

 

Testing HDMI InfoFrames

This section provides steps on how to test handling of auxiliary (InfoFrame) packets by an 

HDMI display. The generator loads and sends default Auxiliary Video Information (XAVI), 

Audio (XAUD), and Source Product Description (XSPD) InfoFrame packet buffers to the 

display for each format (see table on page 149 for a listing of HDMI formats). The XAVI 

and the XAUD InfoFrame packets are sent at every frame (repeated mode), while the 

XSPD is sent only once. The XMPG and XGIF InfoFrames are gated off and not enabled.

Viewing InfoFrame contents

The 802 generator provides a convenient method for monitoring the InfoFrame content of 

the transmitted HDMI signal.

To view current HDMI InfoFrame contents transmitted from the generator:

1. Connect an HDMI display to the Tx connector on the generator.

2. If necessary, set up the generator for HDMI output.

•

See  “

Setting up the generator for HDMI operation

” on page 147 for steps on setting 

up the generator for HDMI operation.

3. Using the 

Format

 knob, select the HDMI format you want to test. 

4. Using the 

Image

 knob, select the PacketTx image.

The PacketTx image appears on the connected HDMI display. The image shows the 

current settings for the AVI InfoFrame output. 

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments