Quantum Data 802BT User Manual Download Page 178

Page: 178 / 744

168

Chapter 10

Testing EDID

5. Release the

Step

, and

keys to enable status display on the generator (see

example below).

The format status on the LCD will indicate whether the unit is outputting HDMI or DVI

signal protocol from the Tx connector. An “H” in the format status (H8C in the example

above) indicates HDMI output; a “D” in the format status indicates DVI output.

Note: With the compliant Hot-plug Formats mode active and a hot-plug detected, the

generator automatically selects the appropriate TMDS output signal protocol (HDMI or

DVI) for the attached display (via EDID read).

To configure the analyzer for internal measurements:

1. Connect a digital display with the DVI or HDMI transmitter on the generator.

2. Select the Analzyer image.

The Analyzer Setup Utility appears on the connected display.

3. Press and release the

Step

key.

The

Step

key illuminates and the

Analyzer Images

field is highlighted.

H31 D8C=DMT0659

V60 0=SMPTE133

Video type

Format name

Image name

Color depth

Color space

Image version

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands