Quantum Data 802BT User Manual Download Page 181

Page: 181 / 744

802BT/802R Video Test Generator User Guide

171

EDID testing for sink devices

The generator can emulate an HDMI, DVI or VGA source device in order to test HDMI, DVI

or VGA displays. This includes viewing EDID from a display and writing EDID data to a

display. The generator can test an HDMI display device’s EDID structure and transmission

in accordance with the HDMI Compliance Test Specification 1.0.

Viewing EDID from a display

You can use the generator to view EDID from a DDC-compliant VGA, HDMI or DVI display

connected with the generator.

To view EDID information from an HDMI, DVI or VGA display:

1. Connect an HDMI, DVI or VGA device to the HDMI, DVI or VGA Tx connector on the

generator.

2. Using the Format knob, select an appropriate format for the HDMI, DVI or VGA display

connected to the HDMI, DVI or VGA Tx connector.

Alternatively, to automatically configure the Format knob list based on the EDID of the

display, hold down the

key, and then press and release the

ACS

key.

3. Using the

Image

knob, select the EdidData image.

The EdidData image displays the first block of data.

4. Press the

Step

key, turn the

Image

knob to the first EDID block.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Quantum Data 802BT, User Manual, Page: 181 / 744

Search results

Summary of Contents for 802BT

Reviews: