manualshive.com logo in svg

Quantum Data 802BT, User Manual, Page: 157 / 744

Share
Download
Quantum Data 802BT User Manual Download Page 157

 

802BT/802R Video Test Generator User Guide

147

 

Getting started

This section provides basic information on how to operate the 802 generator using the 

HDMI option.

HDMI connections

The generator with the HDMI option has two connectors. In addition to an HDMI Tx 

(output) connector that emulates an HDMI source device, an AV connector allows external 

SPDIF audio to be input to the HDMI signal. To use the AV port, an RCA-to-VGA cable is 

included with the generator.

The following figure shows the location of these connectors on a model 802 generator with 

the HDMI option.

Setting up the generator for HDMI operation

To perform testing using the HDMI option, you must ensure that the generator is 

configured to output HDMI signals:

To set up the generator to perform HDMI testing:

1. Hold down the 

G

 and

 B 

keys, and then power on the generator.

The following message appears on the front panel LCD.

2. Release the 

G

 and 

B

 keys.

The generator is placed in Digital Friendly mode.

SS

A

V

Tx

V

GA

HDMI transmitter

A

u

dio/

V

ideo connector

   

              

   

Special:     keys
Digital friendly

    

   

 

    

 

     

     

 

   

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments