Quantum Data 802BT, User Manual

Page: 732 / 744

722 Appendix C Error Messages
2801 Pseudo-random noise sequence exceeds limit
The length of the pseudo-random noise sequence exeeds maximum value.
2802 Pseudo-random noise type is not supported
The pseudo-random noise type is not supported.
2803 No signal input to analyzer
There is no signal input to the receive interface of the analyzer.
2804 X coordinate for delta patch out-of-range
The value specified for the X coordinate of the delta patch test is out-of-range.
2805 Y coordinate for delta patch out-of-range
The value specified for the Y coordinate of the delta patch test is out-of-range.
2806 Patch height must be greater than one
The patch height specified for a delta error test must be greater than one.
3000-3999 Image errors
3000 Invalid color name
The current firmware does not support a named color used by one or more primitives in
the user defined custom image
3001 Invalid pattern name
The current firmware does not support a named fill patterns used by one or more
primitives in the user defined custom image
3002 No image memory
There is not enough unused edit buffer memory space available to start a new custom
image editing session.
3004 Invalid font name
The current firmware does not support a named font used by one or more primitives in the
user defined custom image
3005 Image editor running
The current firmware does not allow a new custom image editing session to be started
while the current custom image editing session is still running.