Quantum Data 802BT User Manual Download

Page: 13 / 744

802BT/802R Video Test Generator User Guide

•

High Bandwidth Digital Content Protection (HDCP).

Generates HDCP encrypted

content for testing DDCP-compliant displays.

•

DVI or HDMI Analyzer.

Optional receiver, which measures pixel errors at different

frequencies, measures timing of external sources, and displays EDID from external

sources. Can also be used to test cables or distribution systems.

•

High Definition Multimedia Interface (HDMI).

The HDMI feature helps manufacturers

increase the likelihood that their products will not only meet compliance standards, but

also flawlessly interoperate with other HDMI devices.

•

General Purpose Interface Bus (IEEE-488).

Use to operate the generator in an

automated environment.

•

Component video BNC connectors.

The generator can be equipped with R, G, B,

VS, and HS/CS BNC connectors.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands