Quantum Data 802BT User Manual Download Page 123

Page: 123 / 744

802BT/802R Video Test Generator User Guide

113

3. Using the

Image

knob, toggle between ON (to enable analyzer images) and OFF (to

disable analyzer images) setting.

4. Press and release the

Step

key to save the currently displayed parameters.

The light on the

Step

key extinguishes, and the new settings are implemented for

Analyzer mode operation.

Starting the analyzer

The analyzer functions as a special operating mode within the 802 generator. You must

place the generator into this mode to perform any analyzer tasks.

To put the generator in the analyzer mode:

1. Start the generator in Digital-Friendly mode (see page 18).

2. Press and release the Outputs key. The light on the key extinguishes.

3. While holding down the G key, press and release the Outputs key.

The Outputs key illuminates and the following message appears on the LCD. This

indicates that the generator is in analyzer mode (example shows DVI analyzer).

To take the generator out of the analyzer mode:

1. Press and release the Outputs key.

The generator is returned to the normal mode as a signal source. The LCD shows the

format and image currently active.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands