VIBSCANNER 11.2010
24
Multimeter measurement
VIBSCANNER can be used as a measuring instrument for
characteristic overall values. This section describes the
operating sequence of these measurements in the multime-
ter mode.
Vibration measurement, internal transducer
You can measure machine vibrations above 10 Hz as well
as high frequency shock pulse signals of bearings and
cavitation using the built-in vibration transducers.
Multimeter
Note
Measurement screen
for vibration level
Unit
RMS / 0-peak-value
Number of averages
Transducer
Countersink the measurement location (e.g. with spe-
cial countersink bit VIB 8.610) and clean it.
• To measure the vibration level (effective vibration veloc-
ity, 10 Hz), select the vibration symbol shown on the left
of the main window.
• Press the transducer perpendicular to the prepared
measurement location with sufficient force (s. above).
• Click the joystick to start the measurement.
Event (p. 42)
