PRÜFTECHNIK VIBSCANNER VIB 5.400 Operating Instructions Manual Download Page 32

Page: 32 / 76

VIBSCANNER 11.2010

Multimeter

Manual input of the measured value

Measurement data that were collected with another mea-
suring instrument can be entered manually.

Set unit and measured quantity

Before entering a measured value, ensure that the correct
measured quantity and unit have been selected. To do so,
check the transducer setup:

• Select the ‘Hand icon’ in the main window.
• Open the transducer setup (Setup -> Transducer)

New transducer:
• Click on the first line (‘->’) to display the list of ‘manual’

transducers.

• Press the function key and click on ‘New’ in the menu.
• Enter a name in the text editor.
• Set up the following parameters:

ENS

. N

AME

: Name of transducer (text editor)

EAS

TYPE

: Measured quantity depends on the signal type

IGNAL

TYPE

: Set to ‘manual’

DIT

QUANTITY

: Description of the measured quantity

NGIN

. U

NIT

: Unit (text editor)

ECIMAL

: Decimal places of the results display

Enter the measured value

• Click on the ‘Hand icon’ in the main window.
• Enter the measured value in the numerical editor and

then click on OK.

• Save the input with ‘Save’.

Summary of Contents for VIBSCANNER VIB 5.400













































































Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands

PRÜFTECHNIK VIBSCANNER VIB 5.400, Operating Instructions Manual

Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands