VIBSCANNER 11.2010
62
Creating / deleting transducers
If a transducer does not appear in the selection list (page
59), click on the last list entry (‘X more...’) to display all
compatible transducers that were created in the factory or
specific to the user.
Otherwise, create a new transducer as follows:
The new transducer must the fulfill the signal specifi-
cations for output voltage / current (±30V; ±20mA).
• Select the measurement task in the main window.
• Open the transducer setup (‘Setup’->’Transducer’) and
click on the first line (‘->’).
Attention!
• Press the function key and click on ‘New’.
Transducer
• Enter a name for the transducer in the text editor.
• Set up the other parameters.
• To accept the settings, press the function key and click
on ‘Save’.
To delete a user-defined transducer, proceed in the same
way but select the ‘Delete’ option (‘Del’) instead of ‘New’.
