VIBSCANNER 11.2010
46
Route
• Select the required measurement position using the
joystick (selection flashes), and click on:
• Connect the transducer specified in the status line (here:
Industrial accelerometer VIB 6.142).
• Start the measurement by clicking on the task icon.
After all measurement locations of the motor have been
completed, the program jumps automatically to the next
machine (here: ‘Ventilator 12’).
In this case, you can either continue to process the
route by clicking on the question marks, or correct the
graphical route in the OMNITREND software and
reload it into the instrument.
Gear is stored in the route, but
gear symbol is missing
Note
A question mark (?) appears if a graphic element has
not been selected in OMNITREND for the particular
route element.
