PRÜFTECHNIK VIBSCANNER VIB 5.400 Operating Instructions Manual Download Page 68

Page: 68 / 76

VIBSCANNER 11.2010

Appendix

Data exchange with the PC

The routes and the current firmware version (update) are
loaded from the PC into the VIBSCANNER.

The VIBSCANNER transmits processed routes and multi-
mode measurement data to the PC.

How to transmit measurement data to the PC:
• Switch VIBSCANNER on.

• Connect VIBSCANNER to the PC. Use the serial PC cable

(VIB 5.430-2) and, if required, the USB to serial cable
adapter (VIB 5.448) provided.

• Start the data transfer in OMNITREND (see OMNI-

TREND Online Help for details).

How to update the VIBSCANNER firmware:

• Switch VIBSCANNER off.

• Connect the battery charger so that the VIBSCANNER is

supplied with power during the update.

• Start the ‘VIBSCANNER UpdateTool’ program.

The update program is contained in the ‘VIBSCANNER’
section of the PRÜFTECHNIK CD. It is installed under
the following directory on the PC by default:

C:/Programs/Pruftechnik/VSCUpdateTool/VSCUpdateTool.exe

• Follow the instructions that appear on the screen.



Note

Summary of Contents for VIBSCANNER VIB 5.400













































































Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands

PRÜFTECHNIK VIBSCANNER VIB 5.400, Operating Instructions Manual

Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands