VIBSCANNER 11.2010
57
Limits
• Set up the number of limits:
• Click on the limit to change it or to adjust it again:
• If necessary, change the name, and enter the new limit.
To deactivate a limit (‘Upper’ / ‘Lower’), press the
function key and click on ‘Opt.’ (options) in the menu.
Set the parameter to ‘inactive’ and click on ‘OK’ in the
menu.
• Press the function key and click on ‘OK’.
• If necessary, repeat the procedure for ‘Warning’ and
‘Prewarning’.
• To accept the settings, press the function key in the
‘Setup for user-defined limits’ (see page 56), and click
on ‘Save’.
1 = Alarm
2 = Alarm & warning
3 = Alarm & warning &
Pre-warning
Note
