VIBSCANNER 11.2010
18
Changing parameters
Click on the parameter to open an entry mask, the text
editor or a submenu:
• Parameter type ‘Number’: Press the joystick up/ down to
change the value; Press the joystick to the left/ right to
select the units, 10s, 100s, 1000s digits (multidigit
numbers can be set up more quickly in this way).
• Parameter type ‘Text’: Enter the text in the text editor
(see page 63)
• Parameter type ‘Selection’: The settings are selected
from a submenu (i.e. ‘Units’). If only a few parameters
are available for selection, the submenu does not ap-
pear. The parameters can be set simply by clicking on
them (e.g. ‘tool tips = yes/no’).
The cursor for variable parameters is displayed inverted. A
frame appears around non-variable parameters.
To accept the setting, click on the parameter. To cancel it,
press the ‘Escape key’.
If all the menu items cannot be displayed in a single
window, an arrow symbol appears at the upper edge of the
window. Move the cursor across the lower edge of the
window to scroll forwards. To scroll backwards, move the
cursor across the upper edge of the window.
Finally, save the changes. Press the function key* to show
the menu and click on ‘Save’:
Getting started
*Alternatively:
Move the cursor across the
right edge of the window.
Example of parameter types
in the transducer setup
- Num: 'Power off'
- Text: ‘Company’
- Selection: 'Display'
Scroll forwards
Show menu
