PRÜFTECHNIK VIBSCANNER VIB 5.400 Operating Instructions Manual Download Page 59

Page: 59 / 76

VIBSCANNER 11.2010

Transducer



Note

Setting up the transducer

• Mark the vibration measurement task in the selection

screen without clicking on it.

• Press the function key and click on ‘Setup’.

• Click on ‘Transducer’ to open the transducer setup:

• Click on the first line (‘->’) to display the list of available

transducers*:

• Click on the required transducer. The program returns

to the transducer setup.

• Press the function key and click on ‘Save’ to save the

change. The program returns to the Setup menu.

• Press the Escape key twice to return to the main

window.

• To start the measurement, click on the measurement

icon.

If the transducer you are using is not installed in the
VIBSCANNER, you must install it. Details of how to do
this are given on page 62.

Transducer setup

Transducer signal type (page 19)

*Preselection of the transducers
takes place in the instrument
setup (page 21)

Transducer selection list

Summary of Contents for VIBSCANNER VIB 5.400













































































Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands

PRÜFTECHNIK VIBSCANNER VIB 5.400, Operating Instructions Manual

Search results

Summary of Contents for VIBSCANNER VIB 5.400

Reviews:

Related manuals for VIBSCANNER VIB 5.400

Brands by name

Popular brands