VIBSCANNER 11.2010
4
Introduction
Foreword
This manual describes the main functions of the VIBSCAN-
NER as well as the most important steps of its operation.
The optional firmware modules ‘FFT Analysis’, ‘Balancing’
and ’Signal Analysis’ are described in the manual ‘VIB-
SCANNER - FFT-Analysis & Balancing’ (VIB 9.664.G).
An online help function is integrated in the instrument that
can be called up at any time via the menu.
This manual is valid for firmware version 2.00 and higher.
Symbols used in this manual
Danger to life and limb!
This symbol warns of operating errors that can lead to
data loss or equipment damage.
This symbol denotes information and tips on operating
VIBSCANNER.
Intended use
- VIBSCANNER may only be used for the measurement of
machine signals in industrial environments while taking
into consideration the technical specifications (see "Ap-
pendix - Technical data").
The housing is made of an electrically conducting
plastic. Consequently, the instrument may only be used
to measure small signal voltage (±30V) or small signal
current (±20mA).
- Transducers and cables may be used only for their
respective intended uses as defined in the corresponding
sales leaflets.
Any other use constitutes improper use and is prohibited.
PRÜFTECHNIK assumes no liability for damage resulting
from improper use.
Introduction
WARNING!
Attention!
Note
