PRIMERGY BX620 S2 User Manual Download Page 46

Page: 46 / 289

Chapter 3 OS Installation Using ServerStart

3.1 Guided Mode

In guided mode, follow the wizard to specify hardware configuration and the OS to be

installed, save the information necessary for installation in a configuration file, and

install the OS.

Using the USB CD-ROM Drive / USB Floppy Disk Drive

It is strongly recommended that only products listed on the following website are connected to the

server.

PRIMERGY website (http://primergy.fujitsu.com)

3.1.1 Starting Up the Guided Mode

When you do not configure an array but will perform installation to a server with configured arrays,

remove the array before starting up ServerStart. For the details about deleting an array, refer to "8.3.7

RAID Properties Submenu" (

pg.225).

Connect the USB CD-ROM drive and USB floppy disk drive to the server blade.

Use the USB Cable to connect the USB CD-ROM drive and USB floppy disk drive. For more

information on the connection procedure, refer to "Start Guide".

Turn on the server and insert the ServerStart CD-ROM immediately.

ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands