PRIMERGY BX620 S2 User Manual Download Page 160

Page: 160 / 289

160

Chapter 5 Operations after OS Installation

■

Deleting a VLAN

Follow the steps below to delete a VLAN.

Log on to the server blade with administrator privileges.

Click [Start]

→

[Settings]

→

[Control Panel]

→

[Intel

PROSet Wired], and start

Intel

PROSet.

Select the VLAN to delete and click it.

Click [Delete VLAN].

The confirmation message appears.

Click [OK].

When an attempt is made to delete the last VLAN, the message will be displayed. Click [OK].

Click [OK] to exit Intel

PROSet.

Restart the server blade.

5.6.4 Local Address Setting

Follow the steps below to specify a local address.

Log on to the server blade with administrator privileges.

Click [Start]

→

[Settings]

→

[Control Panel]

→

[Intel

PROSet Wired], and start

Intel

PROSet.

Select a LAN adapter to set the local address and click the [Advanced] tab.

Specify a local address in [Locally Managed Address].

Enter 12 hexadecimal characters beginning with "02".

Click [OK] to exit Intel

PROSet.

Restart the server blade.

When returning to a global address, delete the value specified in step 4.

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands