PRIMERGY BX620 S2 User Manual Download Page 251

Page: 251 / 289

251

PRIMERGY BX620 S2 Server Blade User’s Guide

Opera

tio

n and

Mai
n

nan

■

Error Window Appears after LAN Driver Installation (on Windows
Server 2003)

The following window may appear when the installation of the LAN driver to the [Ethernet controller]

under [Other devices] starts.

This is because the LAN driver for the network adapter recognized immediately after the OS installation

is not updated.

Click [X] to close this window. Clicking [Finish] in this window displays the [Help and Support Center]

window.

The "!" mark is displayed at the LAN device name in Device Manager. Device names are displayed

properly when all LAN drivers are installed and the system is restarted.

For details on LAN driver installation, refer to "4.3.3 Installing the LAN Driver" (

pg.121).

■

Application Error in the OS Installation Wizard in ServerStart
Preconfiguration Mode

Executing the preconfiguration mode on a client computer installed with Microsoft Visual Studio 6.0

Service Pack 5 will cause an application error.

Install ServerStart in a client computer in a different environment or use the guided mode on this server.

This problem does not occur in Windows 2000 Server since it is corrected by Windows 2000 Service

Pack 4.

■

Error Message Appears during LAN Driver Installation and LAN Does
Not Operate Properly

A conflict may have occurred between system resources including the LAN and other expansion cards.

Delete all LAN drivers and check that conflicts between system resources do not exist. Then, restart the

system and install the LAN drivers.

"4.3 Installing the LAN Driver" (pg.118)

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands