PRIMERGY BX620 S2, User Manual

Page: 240 / 289

240
Chapter 9 Operation and Maintenance
9.1 Daily Maintenance
This section explains how to perform the maintenance during operations.
9.1.1 Checking the Server Condition
Use the status LED and server monitoring tool to check the server status.
■
Checking Each LED
This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For details on the location and function for
each status display LED, refer to "Chapter 1 Component Names and Functions" in the "BX600 S2 Blade
Server System Unit Hardware Guide".
■
Server Monitoring Tool (ServerView)
ServerView is software to monitor that the server hardware is in a normal state to protect important
server resources. When using ServerView, the server hardware is monitored all the time. If an error that
could cause trouble is detected, the administrator is notified in real-time for early detection. This allows
the server administrator to remove a system error early and avoid trouble.
For an overview and installation of ServerView and other high reliability tools, refer to "1.2 Supplied
Software" ( pg.17) and "Chapter 6 High Reliability Tools" ( pg.163).
■
Check Using Management Blade
The Management Blade is equipped with two management interfaces (Web UI and CLI) that enable you
to monitor whether the server hardware is running properly.
For details on the Management Blade, refer to "BX600 S2 Blade Server System Unit Hardware Guide".