PRIMERGY BX620 S2, User Manual

Page: 159 / 289

159
PRIMERGY BX620 S2 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
Operatio
ns
after O
S
In
st
al
lation
■
Creating a VLAN
Follow the steps below to create a VLAN.
1
Log on to the server blade with administrator privileges.
2
Set the port of the Switch Blade connected to each LAN port or the port of an
external switching hub, so that a VLAN tag frame can be transferred.
3
Click [Start]
→
[Settings]
→
[Control Panel]
→
[Intel
®
PROSet Wired], and start
Intel
®
PROSet.
4
Select a LAN adapter to set up a VLAN and right-click it.
A VLAN cannot be set to an adapter composing a team.
5
Click [Add VLAN].
6
Specify [ID] and [Name]. Then click [OK].
The [ID] should be identical with the switch setting. The allowable range is 1 to 4094.
The [Name] does not need to be identical with the switch setting.
When the confirmation message appears, select [Yes].
7
Repeat Steps 4 through 6 to set respective VLANs.
8
Click [OK] to exit Intel
®
PROSet.
When configuring a VLAN is completed, a virtual adapter "Intel(R) Advanced Network Services
Virtual Adapter" will appear.
Upper protocols will be bound with this virtual adapter.
You cannot bind them with the LAN card consisting a team.
The IP address should be specified in this virtual adapter.
9
Restart the server blade.