PRIMERGY BX620 S2 User Manual Download Page 110

Page: 110 / 289

110

Chapter 4 Manual OS Installation

6. If "Connect Windows Update to search software?" message appears, check "No,

not this time".

7. Click [Next].

8. Select [Install the hardware that I manually select from a list (Advanced)] and click

[Next].

9. Select [Find an optimum driver (Recommended)] and click [Next].

10. Click "Use disk".

11. Select "FSC SCSI Termination Module GEM318" and click [Next].

12. Click [Finish].

Install RAID Management Tool.

For details about how to install, refer to "Chapter 2 Installing Global Array Manager (GAM)" in

"Onboard SCSI RAID User's Guide".

Install high reliability tools.

To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" (

pg.163) and

install high reliability tools.

The installation of Windows Server 2003 x64 is completed.

●

Before Starting Operation

After OS installation, refer to "Chapter 5 Operations after OS Installation" (

pg.127) and perform

necessary operations.

4.2.2 Installing Windows Server 2003

■

Notes on Manual Reinstallation

When using the installation CD-ROM supplied with the server to reinstall Windows Server 2003, start

the BIOS Setup Utility before installation, and set [Com Port Address] to [Disabled] in the [Console

Redirection] submenu of the [Advanced] menu.

"8.2.6 Console Redirection Submenu" (pg.205)

■

Installation Procedure

Create driver disks.

Prepare necessary drivers before installing Windows Server 2003.

Some drivers are created from the ServerStart CD-ROM. For how to create driver disks, refer to

"4.1 Creating Driver Disks" (

pg.102).

Connect the USB CD-ROM drive and USB floppy disk drive to the server blade.

Use the USB Cable to connect the USB CD-ROM drive and USB floppy disk drive. For more

information on the connection procedure, refer to "Start Guide".

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands