PRIMERGY BX620 S2, User Manual

Page: 115 / 289

115
PRIMERGY BX620 S2 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
Manu
al O
S
In
st
allation
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive]:\DRIVERS\ChipSet\Intel\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
4. When the "InstallShield(R) wizard has completed." message appears, remove the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
8
Install the LAN driver.
Use the ServerStart CD-ROM to install the LAN driver. For more details, refer to "4.3.2
Updating LAN Drivers" ( pg.119).
9
Install the display driver.
1. Insert the ServerStart CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive]:\DRIVERS\VIDEO\ATI\Radeon\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
When the installation is completed, the completion window appears.
4. Eject the ServerStart CD-ROM from the CD-ROM drive, click [Finish], and restart
the system.
10
Install the fibre channel driver.
When the Fibre Channel Daughter Card is installed, use the driver disk created from the
ServerStart CD-ROM to install the fibre channel driver after Windows 2000 Server installation
was completed. For more details, refer to "4.4.2 Windows Server 2003" ( pg.125).
11
Apply Windows 2000 Service Pack.
For details, refer to the description in the window.
Drivers may be replaced with those in the Service Pack during Service Pack application. For
more details, refer to the manual supplied with the hardware.
12
When using the USB 2.0 standard functions, install the USB controller driver.
When using the BIOS Setup Utility to change [USB 2.0 Controller] to [Enabled] in the
[Advanced] menu "8.2.7 Advanced Chipset Feature Submenu" ( pg.206), install the USB
controller driver as in the procedures below.
1. Log on to the server blade with administrator privileges.
2. Click [Start]
→
[Administrative Tools]
→
[Computer Management].
3. Click [Device Manager].
4. Double-click [Universal Serial Bus controllers].
5. Right-click [Universal Serial Bus (USB) Controller], and click [Properties].
The [Universal Serial Bus (USB) Controller properties] window appears.
6. Click [Reinstall Driver].
The [Upgrade Device Driver Wizard] window appears.