PRIMERGY BX620 S2 User Manual Download Page 94

Page: 94 / 289

Chapter 3 OS Installation Using ServerStart

■

Starting Installation

Start installation from the target server.

●

In Guided Mode / Expert Mode

Connect the USB CD-ROM drive and USB floppy disk drive to the target server

blade.

Use the USB Cable to connect the USB CD-ROM drive and USB floppy disk drive. For more

information on the connection procedure, refer to "Start Guide".

Turn on the server and insert the ServerStart CD-ROM immediately.

ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.

Create a ServerStart floppy disk.

When the ServerStart floppy disk supplied with the server is used

1. Insert the ServerStart floppy disk supplied with the server. Make sure that

"Removable media" and "A:" are selected and click [Create].

The network startup setting window for remote installation appears.

2. Click [OK].

The [Initialization of ServerStart core running] window appears and unattended installation

will be started. Depending on the hardware configuration, this process may take a few

minutes. When the process is completed, the [Create a ServerStart Floppy Disk] window

appears.

3. Click [Build a ServerStart Floppy Disk].

Creation of a ServerStart floppy disk starts. When the creation is completed, the "Floppy

disk has been created." message appears.

When the remote floppy is used

1. Select "Remote (media)" and click [OK].

The network startup setting window for remote installation appears.

2. Click [OK].

The [Specify Drive] window appears.

3. Enter [Remote path], [User name], and [Password] and click [OK].

The [Initialization of ServerStart core running] window appears and unattended installation

will be started. Depending on the hardware configuration, this process may take a few

minutes. When the process is completed, the [Welcome to ServerStart] window appears.

Click [Click here to prepare and/or initiate an operating system installation].

The [Select the operating system to be installed] window appears.

Click [Special Hints on Operating System Installation] and read the contents. Important

information such as limitations on disk configuration is described.

Click [MS Windows Operating Systems].

The [Microsoft Windows Operating System Installation] window appears.

Select the OS to install and the mode.

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands