PRIMERGY BX620 S2, User Manual

Page: 141 / 289

141
PRIMERGY BX620 S2 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
Operatio
ns
after O
S
In
st
al
lation
5
Check that the storing information file is created.
Enter the following command and press the [Enter] key.
A:\SMT\>dir
Check that "SAVECMOS.BIN" and "nvram.enu" are created.
Storing procedure is completed. The server can now be turned off safely.
5.3.2 Recovering BIOS Information with Server
Management Tools
If the information configured with the BIOS Setup Utility was deleted due to a drain of the built-in
server battery, etc., restore the BIOS information according to the following procedures:
Do not turn off the server during a program run.
Before starting the system from the "Server Management Tools" disk, if the ServerView "OS Boot
Monitoring" function is enabled, disable it (it is "Disabled" by default).
If you start up the system while the "OS Boot Monitoring" function remains effective, the operation of
the server may become unpredictable at such times as an abrupt power interruption or restart.
If the server is operated with the "OS Boot Monitoring" function enable, enable the function again
before resuming operation. For details of ServerView, refer to "ServerView User's Guide".
Information on other server blades or BIOS information in different versions cannot be recovered.
1
Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
The window for selecting a keyboard appears.
2
Select a keyboard.
Select "1" for the Japanese keyboard or "2" for the English keyboard. The Japanese keyboard is
selected by default.
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection