PRIMERGY BX620 S2, User Manual

Page: 227 / 289

227
PRIMERGY BX620 S2 Server Blade User’s Guide
1
8
Hardwa
re Configu
ration/Utili
tie
s
■ Deleting a Disk Array
1
Select [RAID Properties] submenu from the [Adapter Properties] menu.
"8.3.5 Adapter Properties Menu" (pg.222)
2
Select [Delete Array] and press the [Enter] key.
3
When [RAID Properties Changed] appears, select [Save changes then exit this
menu] and press the [Enter] key.
8.3.8 Formatting Hardware Physically
On this server, physical formatting cannot be performed from SCSI Setup Utility menus.
When a hard disk must be formatted physically, perform the following procedure to run the SCSI Low-
Level Format Utility.
Physical format deletes all data on the selected hard disk. Make a backup before using this function.
Physical format of a hard disk takes time. Once started, it cannot be aborted. Perform it when you have
enough time.
Do not turn off or reset the server during physical formatting. Otherwise, the hard disk may be
damaged.
The "Server Management Tools" disk attached to the server is required. Prepare it in advance.
Hard disk units in a disk array configuration cannot be physically formatted. Delete the disk array
beforehand. For the procedure for deleting a disk array, refer to "
■
Deleting a Disk Array" ( pg.227).
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMn.nn.nn
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute<Item>
SCSI
ID
0
1 Array
DISK?
[Yes]
[Yes]
RAID Properties Array: SCSI ID: Size(MB):
Hot
Spare
[No]
[No] Status Predict
Failure Size
(MB) Device Identifier
-
***MB
<Next Array> <Delete Array> <Add/Delete Hot Spare> <Activate Array>
Primary
Out of Sync
***MB