manualshive.com logo in svg

PRIMERGY BX620 S2, User Manual

Share
Download
PRIMERGY BX620 S2 User Manual Download Page 100

100

Chapter 3  OS Installation Using ServerStart

1

Start up ServerStart.

If ServerStart has already been started, it is not necessary to restart it. If it has not, start it up 

according to the following procedures:

When the CD has been copied on Windows 2000 Professional/Windows XP 
Professional

1. Click [Start] 

→

 [Programs] 

→

 [Fujitsu Siemens ServerStart] 

→

 [ServerStart].

ServerStart starts up and the [Welcome to ServerStart] window appears.

When Windows NT is used, or if the CD has not been copied

1. Insert the ServerStart CD-ROM into the client computer.

ServerStart starts up and the [Welcome to ServerStart] window appears.

2

Select the OS to install.

The preconfiguration mode starts up.

3

Insert the ServerStart floppy disk copied in the preparatory procedure into the 

floppy disk drive and click [Start here to configuration file].

The [Open ServerStart Configuration File] window appears.

4

Specify "SerStartBatch.ini" on drive A and click [Create].

The display returns to the preconfiguration mode window.

For procedures from setting wizards to completion of installation, refer to "3.2 Preconfiguration 

Mode" (

pg.64).

 

 When performing remote installation, refer to "3.4 Remote Installation" (

pg.78).

Settings values in wizards

Setting items in wizards are set to the values set on the first server. For installation on subse-                 
quent servers, you must change the following items in the "OS installation wizard". For other              
items, change the settings as necessary. You do not need to start up wizards where no settings                
will be changed.

If the settings for the first server are not reflected to wizards, perform the procedures from               
copying the floppy disk over again.

table: Settings to be Changed for Installation on Subsequent Servers

Window 

name

Setting item name

Remarks

User 
Information

Computer name

The setting must be changed when the second 
and subsequent servers are on the same 
network as the first server.

Product ID/CD key

The setting must be changed.

Network 
Protocol

IP address

The setting must be changed when the second 
and subsequent servers are on the same 
network as the first server.

Summary of Contents for BX620 S2


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands