PRIMERGY BX620 S2, User Manual

Page: 222 / 289

222
Chapter 8 Hardware Configuration/Utilities
8.3.5 Adapter Properties Menu
Sets detailed configuration information on each SCSI adapter.
From the list area on the [Main] menu, select the SCSI adapter to configure.
table: Items on the Adapter Properties Menu
Item Setting Description
Device Properties Configures devices connected to SCSI adapters. Press the [Enter] key to display
the submenu.
"8.3.6 Device Properties Submenu" (pg.224)
RAID Properties Configures or deletes an array.
Synchronize Whole Mirror The server does not support this. Do not select this.
Rebuild
Host SCSI ID 7 (Fixed parameter) Sets the range of host adapter SCSI-IDs.
SCSI Bus Scan Order Low to High (0.Max)
(Fixed parameter)
Sets the order of SCSI devices to be scanned during
POST.
• Low to High (0..Max)
Scans in ascending order of SCSI bus.
• High to Low (0..Max)
Scans in descending order of SCSI bus.
Removable Media Support None (Fixed parameter) Sets whether or not to support a removable disk unit
(MO disk unit) as a SCSI disk drive in the SCSI
Setup Utility.
• None
The disk unit is not supported as a SCSI disk
drive.
• Boot Drive Only
Only the removable disk unit specified as a boot
device is supported as a SCSI disk drive.
• With Media Installed
All installed removable disk units are supported
as SCSI disk drives.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMn.nn.nn
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute<Item>
<Device Properties>
<RAID Properties> <Synchronize Whole Mirror> <Rebuild>
Host SCSI ID [7]
SCSI Bus Scan Order [Low to High (0..Max)]
Removable Media Support [None]
CHS Mapping [SCSI Plug and Play Mapping]
Spinup Delay (Secs) [2]
Secondary Cluster Server [No]
Termination Control [Auto]
<Restore Defaults>
Adapter
1020/1030
PCI
Bus
3
Dev/
Func
28
Adapter Properties