PRIMERGY BX620 S2, User Manual

Page: 257 / 289

257
PRIMERGY BX620 S2 Server Blade User’s Guide
9
Opera
tio
n and
Mai
n
te
nan
ce
9.3 System Event Log
To operate system event log, use Server Management Tools.
This section explains how to use Server Management Tools.
9.3.1 Server Management Tools
Server Management Tools perform the followings to the event log stored in the Baseboard Management
Controller (BMC: a micro-controller used for managing the baseboard environment, such as its
temperature and voltage sensors).
• Viewing the system event log
• Saving logs
• Deleting logs
When an event log occurs, save the log using Server Management Tools and contact an office listed in
the "Contact Information" in "Start Guide".
The system event log of this server blade can be viewed from the management terminal via the
Management Blade.
→
Refer to "BX600 Management Blade Hardware Guide".
The "Server Management Tools" disk is for this server blade only. Do not use those tools on other
systems. If it is used, the system can be damaged.
To execute the "Server Management Tools", follow the startup procedure shown in "9.3.2 Starting and
Exiting Server Management Tools" ( pg.258) to start the server blade. Do not run this tool on the
server started from the hard disk drive or other floppy disks. Otherwise, the system may be corrupted.
Do not eject the floppy disk when the floppy disk access LED is on. Doing so may destroy the data on
the floppy disk.