PRIMERGY BX620 S2, User Manual

Page: 200 / 289

200
Chapter 8 Hardware Configuration/Utilities
table: Items on the Main Menu
Item Setting Description
BIOS Version - Displays the BIOS version of the server blade.
BMC F/W Version - Displays the BMC firmware version of the server
blade.
System Time Present time The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour
clock.
For example, 6:30:00 P.M. is set as "18", "30",
"00".
Note:
Repeat the procedure until the correct time
is set.
If a highly precise system time is necessary,
install a network synchronized time system
(NTP, etc.).
System Date Present date The system date is set in "month:day:year" format.
For example, August 20, 2005 is set as "08", "20",
"2005".
Sync RTC with Mgmt.
Blade • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to synchronize the time
between the Management Blade and RTC.
System Memory - Displays the size of the installed memory.
Memory Test Enabled (Fixed parameter) Sets whether or not to check the memory during
POST.
Note:
Do not change this item Test" to [Disabled].
If it is set to [Disabled], memory failure
cannot be detected at startup.
Even when it is set to [Disabled], a memory
count of 3GB or more will be displayed
during the POST phase.
However, this is a specification of the server
and an actual memory test will not be
performed.