PRIMERGY BX620 S2, User Manual

Page: 53 / 289

53
PRIMERGY BX620 S2 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
O
S
In
st
allation
U
sing ServerS
ta
rt
2
Add, remove, or modify partitions as necessary.
Partition size of the FAT file system
When "FAT" is selected in [File system] and a value equal to or more than 4095MB or "Auto-
matic setting" is specified in [Partition size], the size of created partitions will be 4095MB.
Restrictions of volume label characters
The following limits apply to the volume label length. A volume label longer than the limit may
be used. However, it can cause installation failure. Enter a volume label within the limit.
•FAT: Up to 11 byte characters
•NTFS: Up to 32 byte characters
Add a partition
1. Click [Add].
The [Disk Configuration] window appears.
2. Set each item.
• Guided mode
After setting each item, click [leave wizard] to exit the disk wizard.
When restarting the disk wizard that ended once, save the configuration file. ServerStart
may restart when the disk wizard restarts. If this occurs, open the configuration file you
have saved and start setting from the item where you have discontinued. If the
configuration file is not saved, the settings are lost. Start setting again from the
beginning.
• Preconfiguration mode
Set each item and click [continue], and a new partition is added to the partition list.
Remove a partition
1. Select the partition to remove and click [REMOVE].
The partition is removed.