manualshive.com logo in svg

PRIMERGY BX620 S2, User Manual

Share
Download
PRIMERGY BX620 S2 User Manual Download Page 27

27

PRIMERGY BX620 S2 Server Blade User’s Guide      

1

Overview

1.4 Workflow

Use the following workflow from server installation to start of operation.

Installing the server

Referring to "Safety Precautions" and "Start Guide",  install the server to a suitable place.

Preparing the server

- Install Internal options
- Set hardware

Referring to "BX600 S2 Blade Server System Unit Hardware Guide", "BX600 Switch Blade (PG-SW103) 
Hardware Guide", "BX600 Management Blade Hardware Guide" and "2.1 Preparation on the server", 
"Chapter 7 Installing Internal Options", "Chapter 8 Configuring Hardware and Utilities" in this manual.

Selecting the installation method

Referring to "2.2 Selecting the Installation Method", decide what installation method to use.

ServerStart, a software product that enables everything from OS installation/setup to the installation of 
high reliability tools to be performed in one operation, comes with this serve

r. It is recommended that 

ServerStart is used to perform installation.

Checking precautions on installation

Before installing the OS, check the precautions on installation by referring to "2.3 Precautions on Installation".

Procedures before operation

Before operating the server, refer to "Chapter 5 Operations after OS installation".

High reliability tool installation

Start operations

Installing Internal options

Referring to "Chapter 7 Installing Internal Options", install the Internal options.

Using ServerStart

Referring to "Chapter 3 OS Installation Using 
ServerStart", perform OS installation.

Manual installation

Referring to "Chapter 4 Manual OS 
Installation", perform OS installation.

OS installation

When the OS is installed manually, it is necessary to install high reliability tools. ServerView requires
settings before server operation. For installation method and details about each high reliability tool, refer 
to “Chapter 6 High Reliability Tools”. 

Summary of Contents for BX620 S2


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands