PRIMERGY BX620 S2, User Manual

Page: 258 / 289

258
Chapter 9 Operation and Maintenance
9.3.2 Starting and Exiting Server Management Tools
The steps for starting and exiting Server Management Tools are as follows:
■ Preparation for Using Server Management Tools
To use Server Management Tools, prepare the
"
Server Management Tools
"
disk supplied with the server
at hand.
Use the USB Cable to connect to the floppy disk drive to the server blade.
For more information on the connection procedure, refer to "Start Guide".
■ Starting Server Management Tools
Before starting up the system from the "Server Management Tools" disk, first check that the
ServerView "OS Boot Monitoring" function is disabled (default setting is "Disabled").
If you start up the system while the "OS Boot Monitoring" function remains effective, the operation of
the server blade may become unpredictable at such times as an abrupt power interruption or restart.
If the OS Boot Monitoring function is needed, it should be reset to enabled before resuming normal
server operation. For details of ServerView, refer to "ServerView User’s Guide".
1
Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
2
When the DOS prompt window appears, enter the following command and
press the [Enter] key.
Enter the following command and press the [Enter] key.
A:\>ipmiview
The menu window of Server Management Tools appears.
3
Select an item using the [
↑
] or [
↓
] and press the [Enter] key to display the
screens for each item.
General Information
Temperature Information
Fan Information
Voltage Information
System Event Log (SEL)
FRU Information (ID Proms)
FSC/System Specific Functions
FUJITSU
SIEMENS
COMPUTERS
IPMI-Tool - Vx.xx
< > Select <ENTER> Start <ESC> Exit