PRIMERGY BX620 S2, User Manual

Page: 125 / 289

125
PRIMERGY BX620 S2 Server Blade User’s Guide
1
2
3
4
5
6
7
9
8
Manu
al O
S
In
st
allation
10
Enter floppy disk drive (A:\) in "Copy files from manufacture" and click [OK].
Driver installation starts.
11
Click [Finish].
12
Click [Exit].
Detected drivers are displayed.
4.4.2 Windows Server 2003
1
Insert the "Fibre Channel Daughter Card Driver for Windows 2000/2003,
V9.0.0.12" driver disk created from the ServerStart CD-ROM into the server.
2
Click [Start]
→
[Administrative Tools]
→
[Computer Management].
3
Click [Device Manager].
Two ports of the fibre channel, which is installed in the 2Gbit/s FC I/O Module, are displayed
with the names below.
• [Fibre channel controller] under [Other devices]
Double-click each fibre channel controller and perform the following Steps 4 to 8 on all fibre
channel ports.
4
Double-click the icon of the fibre channel controller.
The properties window appears.
5
Click the [Driver] tab and click [Update Driver].
The [Welcome to the Hardware Update Wizard] window appears.
6
Select [Install the software automatically] and click [Next].
The driver will be installed.
7
Click [Finish].
8
Click [Close].
Detected drivers are displayed.