PRIMERGY BX620 S2, User Manual

Page: 225 / 289

225
PRIMERGY BX620 S2 Server Blade User’s Guide
1
8
Hardwa
re Configu
ration/Utili
tie
s
8.3.7 RAID Properties Submenu
Sets when configuring an array with the onboard SCSI array controller.
table: Items on the RAID Properties Submenu
Item Setting Setting
Array Disk? • Yes (at the time of purchase of
array type)
• No (at the time of purchase of
non-array type)
Sets whether or not using to configure a disk array
the hard disk unit.
Hot Spare No (Fixed parameter) The server does not support this.
Status - Displays the hard disk status when a disk array is
configured.
• [Primary] or [OK]
Indicates that the hard disk unit is operating
normally.
• Failed
Indicates that the hard disk unit has failed.
• Out of Sync
Indicates that the hard disk unit being rebuilt.
• Missing
Indicates that the hard disk unit is not installed or
recognized.
Size (MB) - Indicates the hard disk capacity.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMn.nn.nn
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute<Item>
SCSI
ID
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 Array
DISK?
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
RAID Properties Array: SCSI ID: Size(MB):
Hot
Spare
[No]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-] Status Predict
Failure Size
(MB) Device Identifier
-
1020/1030
SDR CEM318
***MB