Polycom VIEWSTATION EX User Manual Download Page 218

Page: 218 / 356

ViewStation EX User Guide

216

www.polycom.com

Data Conferencing

The ViewStation EX system is T.120-compliant and supports data
conferencing when paired with either a ShowStation IP or Microsoft
NetMeeting.

Data conferencing features are available only on point-to-point
video calls or with external H.320 bridges/MCUs that support this
feature.

Data conferencing is only available during H.320 calls and must be
supported by far site systems.

To access the Data Conference screen:

Select System Info > Admin Setup > Data Conference. The Data
Conference

screen appears.

Figure 6-5.

Data Conference Screen

From this screen, you can enable data conferencing through
Microsoft NetMeeting or a ShowStation IP as described in the
following section.

Note

The Data Conference screen will display the IP address or name of
the data conferencing device. This would be the IP address of the

Summary of Contents for VIEWSTATION EX





































































































































































































































































































































































Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands

Polycom VIEWSTATION EX, User Manual

Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands