Polycom VIEWSTATION EX User Manual Download Page 315

Page: 315 / 356

Appendix A - Screen Reference

313

❑

Enable Remote Access

—This option gives administrator the

the capability to lock out access to FTP, Web, Telnet, and SNMP.
The FTP, Web, Telnet, and SNMP options are enabled by
default.

❑

Crypto Resync

—This option is only available if a

V.35/RS-449/RS-530 network interface is attached to your
system.

Crypto Resync Pulse

This screen is specific to a ViewStation EX system with a
V.35/RS-449/RS-530 network interface.

To access the Crypto Resync Pulse screen:

Select System Info>Admin Setup>Security.

In the Security screen, select the Crypto Resync option.

Note

For more configuration information, refer to

Enabling Crypto

Resync on page 110

Software and Hardware Screens

To access the Software, RS-232, Hardware Information, Send
Address Book, and Far Site Software Update, and System
Options screens:

Select System Info > Admin Setup > Software/Hardware.

Summary of Contents for VIEWSTATION EX





































































































































































































































































































































































Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands

Polycom VIEWSTATION EX, User Manual

Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands