Polycom VIEWSTATION EX User Manual Download Page 223

Page: 223 / 356

Chapter 7 - Using the System with a PC

221

Insert the other end of the cable into a port on the LAN. This
connection is shown in the QuickStart.

To connect the PC to the system:

Insert one end of the provided blue RJ-45 cable into the blue
PC port on the back of the system.

Insert the other end of the cable into the Ethernet port on
your computer.

Power on the system.

Select System Info > Admin Setup > LAN/H.323 >
LAN/Intranet

to configure the system’s LAN/H.323 settings.

The LAN & Intranet screen appears.

Figure 7-1.

LAN & Intranet Screen

In the LAN & Intranet screen, configure the system DHCP
settings, as follows:

Summary of Contents for VIEWSTATION EX





































































































































































































































































































































































Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands

Polycom VIEWSTATION EX, User Manual

Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands