Polycom VIEWSTATION EX User Manual Download Page 33

Page: 33 / 356

Chapter 2 - Installing the ViewStation EX

❑

V.35/RS-449/RS-530 network interface:

•

V.35/RS-449/RS-530 module

•

Optional cables used to connect the V.35/RS-449/RS-530
module to the DCE:

–

(V.35 “Y” cable (HD-44M to DB-25M/RS-366 and M34
“Winchester” V.35 )

–

RS-449/422 “Y” cable (HD-44M to DB-25M/RS-366 and
DB-37M/RS-449/422)

–

Ascend cable (HD-44M to HD-44M)

Note

These cables are available from the Polycom Web store.

•

Access to your Data Communications Equipment (DCE) or
Data Service Unit (DSU).

❑

Quad BRI network interface:

•

Quad BRI Inverse Multiplexer (IMUX)

•

4 RJ-45 cables

–

1 RJ-45 cable with a keyed connector

–

BRI line ordered from your service provider

Power Source

The ViewStation EX system has an external power supply. It
supports line voltages between 100V and 240V and line frequencies
from 47 Hz to 63 Hz.

Warning

You void the warranty and may possibly damage your system if
you do not use the provided power supply.

Summary of Contents for VIEWSTATION EX





































































































































































































































































































































































Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands

Polycom VIEWSTATION EX, User Manual

Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands