Polycom VIEWSTATION EX User Manual Download Page 24

Page: 24 / 356

ViewStation EX User Guide

www.polycom.com

To connect the microphone pods to the system:

Connect the 30-foot (9-meter) cable to the system and one of the
microphones pods.

Connect the 10-foot (3-meter) cable between the two
microphone pods.

Note

Connecting and disconnecting the microphones does not require a
reboot of the system.

Power Supply

The ViewStation EX system has an external power supply. It
supports line voltages between 100V and 240V and line frequencies
from 47 Hz to 63 Hz.

Note

You void the warranty and may possibly damage your system if
you do not use the provided power supply.

Summary of Contents for VIEWSTATION EX





































































































































































































































































































































































Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands

Polycom VIEWSTATION EX, User Manual

Search results

Summary of Contents for VIEWSTATION EX

Reviews:

Related manuals for VIEWSTATION EX

Brands by name

Popular brands