Planmeca Compact i5 User Manual Download Page 44

Page: 44 / 326

8.12 Planmeca ProX X-ray unit

The Planmeca ProX X-ray unit can be mounted to the dental unit pylon.

CAUTION

Drive the chair carefully when positioning the ProX X-ray unit.

CAUTION

Do not drive the chair during the exposure.

CAUTION

Do not touch the external PC and the patient at the same time.

CAUTION

Move the ProX X-ray unit behind the pylon when it is not being used.

For more information about Planmeca ProX, see Planmeca ProX User’s

Manual.

8.13 Planmeca intraoral scanner

The intraoral scanner can be placed in the Flexy-holder.

8 Planmeca Compact i dental unit

34 Planmeca Compact i

User's manual

Summary of Contents for Compact i5







































































































































































































































































































































Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands

Planmeca Compact i5, User Manual

Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands