25.3 Automatic chair positions
When you have signed in to the dental unit with your own user name, all
changes you make to the automatic chair positions and then save, are saved
to your personal settings. This means that whenever you sign in to the
dental unit, you will use your last saved automatic chair positions.
NOTE
The chair height cannot be programmed near the upper limit. The help code
H 8 is displayed if the chair position is not allowed. When needed, the upper
limit can be altered. Contact your Planmeca dealer.
25.3.1 Extended view
About this task
NOTE
If you only want to rename the automatic position or adjust its position on the
list, start programming from step 4.
Steps
1. Move the chair to the required position by using the chair movement
buttons on the control panel or by using the foot control.
2. If you want the operating light or its composite mode to be on (off) in this
position, turn them on (off).
3. Adjust the intensity of the operating light and/or its composite mode as
described in section "Intensity" on page 194.
4. Press Program.
5. Press the Chair positions button.
A list of automatic positions opens.
25 Programming
178 Planmeca Compact i
User's manual
Summary of Contents for Compact i5
Page 1: ...PlanmecaCompact i5 user s manual EN 30011782...
Page 10: ...Table of contents Planmeca Compact i User s manual...
Page 325: ......
